Your going to have to pull the cluster too. Im assuming you have removed the a/c trim, radio trim, and radio. Ok now to get started, these are the colors on the harness according to R240NA aka RDM Turbo-no one got it to work but might as well do it now(purple) Attach them to the following screw terminals. You are going to have to make 4 wires with terminals. And a bunch of round end terminals.Ĭrimp the terminals on the wire. You’ll need some wire, I’d use 14 but that’s me. Option B(highly recommend going junkyard or anywhere to get the plug well worth it) Plug it into the gauge, and follow the directions for the harness(colors are off but wires the same way) ^ That’s the wire configuration you’ll need (- is wire, o is optional, x no wire) If you don’t have the actual harness there are two optionsĪ spare wire harness from a Nissan cluster with a 4x4 configuration Like this Solder(if your hardcore, most connections wont need it) Some spare wire 20-16 works nicely(in about 2 foot pieces)
Ok since RDM write up was long deleted from FA, and I have just finished installing mine here is my write up with pics.